CallEmail Us

Plastic Film Consultants

Looking for experts in plastic film processing?

 

If you are looking to solve an issue or just looking for ways to improve your operation, SolveTech recommends consulting the independent experts below.  All of these recommendations have been personally vetted by SolveTech and are at the top of their field.

 

Blown and Cast Film Extrusion

Kamla Consulting

Roger Kamla

Roger has had Blown Film Consultanta 40+ year career in PE resin development & technical service with Mobil, Himont, and Westlake Chemical. He also served in development and management roles in film extrusion/flexible packaging industry. He has been intimately involved with the development and application of numerous LDPE, HDPE, LLDPE, metallocene PE, EVA, EMA, plastomers, and adhesive resins now used in flexible packaging.

For the last couple of years, Roger has enjoyed sharing his experiences and knowledge to help clients develop and improve their products and processes. His main interest is developing correlations between commercial blown & cast film extrusion performance and resin properties. Roger has prepared and presented numerous technical articles over the years and is a member of the Society of Plastics Engineers and the American Chemical Society.

http://www.kamlaconsultingllc.com/

 

BOPP/BOPET

Plastic Film Experts on Demand

Peter Hoffman and Carsten Franke

This firm specializes in BOPP and BOPET film processing.  They can help with quality control and process issues, as well as help you get your lines up and running.

http://www.plasticfilmexpert.com/

 

Roll Formation and Web Handling

Finishing Technologies, Inc.

Dr. David Roisum

Web Handling ExpertDr. Roisum is a well-known authority in the area of web handling and converting. He has authored nine books that include Winding, Rollers and Web-Handling with his most recent being the Web Machine Buying Guide, and written 200 articles, conference papers and other publications. Dave has been honored by TAPPI with their Finishing & Converting Division Award, Thomas W. Busch Prize and Finest Faculty awards. He was elected TAPPI Fellow in 2003 and received AIMCAL’s President’s Award in 2012.

Dave has his Ph.D. from the Web Handling Research Center where he later became an Industrial Advisory Board member.  He is now a principal of Finishing Technologies Inc., providing consulting services to more than 300 clients who convert or manufacture: paper, film, foil, nonwovens and many other materials. He has accumulated much practical experience working in nearly 1,000 plants over the course of more than three decades. He has shared his experience with nearly 5,000 students

http://roisum.com/

 

 

Extruders

Rauwendaal Extrusion Engineering, Inc

Dr. Chris Rauwendaal

Extrusion ConsultantChris is a well-known author, lecturer, entrepreneur, and consultant in the field of extrusion.  He holds numerous patents and has written more than 200 articles and seven books related to extrusion, mixing, injection molding, and statistical process control.  Chris has developed video training courses and interactive training programs on extrusion, injection molding, and SPC.

He has been involved in technical meetings of the SPE and PPS for many years as a speaker as well as a technical program chairman.  Chris is a Fellow of the Society of Plastics Engineers.

Chris is the developer of the CRD, VIP, ASM mixing technology that utilizes strong elongational flow to improve mixing in extrusion and molding.  CRD and VIP mixing devices are successfully used in many extrusion operations.  Work is ongoing to extend this technology to a new generation of extruders and injection molding machines.  A more recent development is the HHT (high heat transfer) extruder screw developed to improve cooling in foam tandem extrusion operations.

http://www.rauwendaal.com/

 

Plastic Film Sales and Procurement

Joe Plastic

Joe Lambert

Joe LambertHe has worked in the plastic film industry since 1989, and his current focus is on helping foreign flexible packaging related companies to gain access into the North American Flexible Packaging Market.
To do this, he has assembled a high powered, experienced, American-based sales, marketing, logistics, spend and procurement group. His group utilizes longstanding, high profile business relationships and make corporate collaboration and global integration a reality for his foreign based flexible packaging clients.

He can also work with you to help you find a specialty film supplier.

Strategic Flexible Packaging Consulting, New Business Development, Specialty Film Sourcing, Resins, Coatings and responsive service.

http://joeplastic.com

 

If you have any questions regarding any of these plastic film experts, please feel free to contact SolveTech.

 

Plastic Film Consultants  – Plastic Film Experts – Plastic Film Process Help

Back to top